Gys Nomad Power 501 handleiding
Handleiding
Je bekijkt pagina 12 van 44
12
User manual
NOMAD POWER 401 / 501
Translation of the original
instructions
3
1- Connect the red clamp to the (+) of the battery.
2- Connect the black clamp to the (-) of the battery.
4
30"
If the «Start» light becomes green and the «Error» light turns o, everything is ok.
Make a start within 30 seconds.
!
Do not exceed 3 starts with a time interval of 30s between each.
5
After starting, disconnect the smart start cable from its connector and remove the 2 clamps
from the vehicle’s battery terminals within 30 seconds.
!
Leave the vehicle running.
6
If all 3 starts fail, check the «Error» light.
A red «Error» light on is synonymous with an engine or connection problem.
7
After the start-up, if the internal battery is less than 80%, recharge the NOMAD POWER.
!
Wait at least 30 minutes after starting the vehicle to charge the NOMAD POWER.
CHARGING MOBILE PHONES
1 - Plug your cable to the NOMAD POWER USB port 1 (2) or USB port 2 (3).
2 - Select the appropriate adaptor for your mobile phone or table and plug it in.
The NOMAD POWER launches the charge automatically.
POWER SUPPLY (NOMAD POWER 501)
For electronic products 12 V
1 - Connect a power supply cable (not supplied) to the 15 V 5 A
output port (5).
2 - Link the power supply cable to the power socket of your 12 V
electrical device.
FLASHLIGHT FUNCTION
Press the ON/OFF button (6) for 3 seconds to turn on the LEDs.
Briey press the button (6) to switch lighting modes (3 available modes:
normal, stroboscope and SOS).
Bekijk gratis de handleiding van Gys Nomad Power 501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | Nomad Power 501 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5932 MB |
