Gys Nomad Power 501 handleiding
Handleiding
Je bekijkt pagina 11 van 44
EN
11
User manual
NOMAD POWER 401 / 501
Translation of the original
instructions
PRODUCT DESCRIPTION
Thanks to its high-performance lithium-ion battery (401: 37 Wh, 501:45 Wh), the NOMAD POWER 401/501 performs
3 functions:
• Instant start of vehicles equipped with a 12V battery (6 cells of 2V), such as karts, motorcycles, cars, etc.
Do not start a Lithium LiFePO4 battery with this booster as it is equipped with a Lithium LiCoO
2
battery whose
voltage is not compatible.
• Power supply for small electronic devices. Most of mobile phones, smartphones, portable gaming devices, MP3/MP4
players can be charged with the included accessories.
• Service lighting
Start function
NOMAD POWER 401
NOMAD POWER 501
Extreme outside temperatures or mechanical problems on the vehicle (poor starter, no fuel or engine pro-
blems) can limit the booster’s capacity.
OPERATION
1. Press the ON / OFF button (6). The display shows the remaining power and the activated output ports.
2. The display shows a percentage charge from 0% to 100% when the NOMAD POWER is fully charged.
!
RECHARGE THE NOMAD POWER before rst use and after each use.
INTERNAL BATTERY CHARGING
!
It is best to charge the Nomad Power at a temperature > 10°C. If the temperature is below 0°C, do not
charge the Nomad Power. Place the Nomad Power in a temperate room for 1 hour before charging.
!
If the booster is not to be used for a long time, it should be charged to 100% every 6 months to keep
its performance intact.
non fourni
1 - Connect the supplied cable to a suitable charger unit.
2 - Connect the USB-C/USB C cable to the NOMAD POWER input port (4) to start charging.
STARTING THE VEHICLE
Emergency start function for petrol or diesel vehicles equipped with a 12V battery.
To start a vehicle, please process as follows:
!
The NOMAD POWER must be at least 80% charged to make a start. A full charge of the booster is
recommended.
1 Connect the jumper cable to the NOMAD POWER connector (1).
2
If the lights «Start» and «Error» ash alternately in green and red, the pro-
duct is ready.
If only the «Error» light is on, the internal battery of the NOMAD POWER is
too low. Charge the product.
Bekijk gratis de handleiding van Gys Nomad Power 501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | Nomad Power 501 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5932 MB |
