Gys flash 148.12 CNT FV handleiding
Handleiding
Je bekijkt pagina 31 van 72
31
GYSFLASH 108.12 / 148.12 / 158.12 CNT FV
EN
31
CONFIG Designer
This menu is used to modify the advanced settings for each mode and/or charge curve.
Mode Parameter Description
System T_esv Delay time between initiation and the start of the charge
Charge U_esp Minimum voltage to authorise the start of the charge
U_lade Charging voltage
I_lade Charging current
I_ehl
Current threshold beneath which the charger will switch to trickle charging (oating)
T_min Minimum charge duration before switching to trickle charge (oating)
T_max Maximum duration authorised for charging step
Q_max Maximum authorised charge capacity
T/Q_max error Charger behaviour in the event of a T_max or Q_max error:
- EHL : a maintenance charge is applied
- OFF: charger shutdown
U_ehl Maintenance voltage (oating)
T_ges Maximum time allowed for the complete charge cycle
U_low Minimum voltage allowed during charging
EPS Detect Choosing the type of detection:
- Load: detection of contact on the output (example: vehicle with or without battery)
- Bat: battery detection
- Bat (+Force 3s) : Battery detection, with the ability to force-start without a battery
by holding down the START button for 3 seconds
- Manual: No detection, manual start only
U_eps Power supply voltage
I_eps Maximum current
U_low Minimum voltage allowed during power supply
T_max Maximum authorized operating duration
Power-up U_bat_err Maximum voltage allowed to start Power-Up mode
U_reakt Reactivation and pre-charge voltage
I_reakt Reactivation and pre-charge current
T_reakt Duration of reactivation period
I_reakt_err Minimum current required at the end of reactivation in order to consider the battery
reactivated, and move on to the next stage.
T_lade Duration of lithium battery precharge stage after reactivation
U_verif Minimum voltage required to consider a battery successfully reactivated during the
test phase
T_verif Duration of lithium battery test stage
U_low Minimum voltage allowed during reactivation and precharging
Portability
This menu is used to import, export, or initialize congurations for the gysash.
Bekijk gratis de handleiding van Gys flash 148.12 CNT FV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gys |
| Model | flash 148.12 CNT FV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9530 MB |
