GW Instek GPE-1205 handleiding
Handleiding
Je bekijkt pagina 33 van 51
Operation
33
Turn Output
Off
Press the Output key. The Output key
light will go out and OFF will be
displayed in the status bar to indicate
that the output is off.
OFF
Master-Slave Series Overview
Background
When connecting GPE-1000 power supplies in series,
up to 2 units can be used in series and all units must
be of the same model. When operated in series, the
power supplies can be used to increase the voltage
output or setup the power supplies to output both
positive and negative polarities. Series operation only
requires configuration of the slave, the master unit
remains in local mode.
In order for the master unit to control the slave units,
the master unit must use the Analog Programming
connector on the rear panel to control the slave unit.
When using a I/O interface, the interface must be
properly connected to the main and secondary power
sources using RS-232 lines in series.
Series power supplies require some pre-setting and
limitations
Bekijk gratis de handleiding van GW Instek GPE-1205, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GW Instek |
| Model | GPE-1205 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4219 MB |
