Growatt SPE 6000-12000 US handleiding
Handleiding
Je bekijkt pagina 7 van 33
2、It's very important for system safety and efficient operation to use appropriate
cable for battery connection. To reduce risk of injury, please use the proper
recommended cable and terminal size as below.
Recommended battery cable and terminal size:
Model
Wire Size
Torque value
SPE 12000 US
2 * 2 AWG
2*33.62mm²
2-3 Nm
SPE 10000 US
2 * 2 AWG
2*33.62mm²
2-3 Nm
SPE 8000 US
2 * 4 AWG
2*21.15mm²
2-3 Nm
SPE 6000 US
2 * 4 AWG
2*21.15mm²
2-3 Nm
O-type terminal:
3、Battery Module Selection： Choose the appropriate battery according to the
actual situation.
Battery Type
SPE 12000 US
SPE 10000 US
SPE 8000 US
SPE 6000 US
Lead-acid
Battery
400Ah capacity
battery
300Ah capacity
battery
300Ah capacity
battery
200Ah capacity
battery
Lithium Battery
400Ah capacity
battery
300Ah capacity
battery
300Ah capacity
battery
200Ah capacity
battery
Please follow below steps to implement battery connection:
1、Assemble battery ring terminal based on recommended battery cable and
terminal size.
2、Connect all battery packs as units requires.
3、Insert the ring terminal of battery cable flatly into battery connector of inverter
and make sure the bolts are tightened with torque of 2Nm.
Make sure polarity at both the battery and the inverter/charge is correctly
connected and ring terminals are tightly screwed to the battery terminals.
3.3.2 Battery power cable connection
3.3.3 Lithium battery communication cable connection
If used with lithium batteries, make sure to connect the BMS communication cable
between the battery and the inverter. It is recommended to use lithium batteries
that have been tested with our configuration.
Please follow below steps to implement BMS communication cable connection:
1、Connect one end of the battery's communication cable to the inverter's BMS
communication port (below left), which supports RS485 or CAN protocols.
2、Theotherendofthebatterycommunicationcableplugsintothebatterycom
municationport(RS485orCAN).
3、The inverter BMS port pin and RS485 port pin assignment shown as below:
Pin number
BMS port
RS485 port
(for expansion)
1
RS485B
RS485B
2
RS485A
RS485A
3
--
–
4
CANH
–
5
CANL
–
6
--
–
7
--
–
8
–
–
8
7
Bekijk gratis de handleiding van Growatt SPE 6000-12000 US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPE 6000-12000 US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6565 MB |
