Growatt SPE 6000-12000 US handleiding
Handleiding
Je bekijkt pagina 14 van 33
Firmware version
(CPU1: 169-00-527; CPU2:142-
00-529; CPU3:170-00-528)
Time
(13:54:29, May 29, 2024)
4.2.3 Operating Mode Description
Line Mode
The unit will
provide
output power
from the
mains. It can
also charge
the battery at
line mode.
Charging by PV energy
Charging by utility
No battery connected
Battery Mode
The unit will
provide
output power
from battery
and PV
power.
Power from battery and PV energy
Power from battery only
Operation mode
Description
LCD display
Standby mode /Power saving
mode
Note:
*Standby mode: The inverter is
not turned on yet but at this time,
the inverter can charge battery
without AC output.
*Power saving mode: If enabled,
the output of inverter will be off
when connected load is pretty
low or not detected.
No output is
supplied by
the unit but it
still can
charge
batteries.
Charging by PV
energy
No charging
Fault mode
Note:
*Fault mode: Errors are caused
by inside circuit error or external
reasons such as over
temperature, output short
circuited and so on.
PV energy can
charge
batteries.
Charging by PV
energy
No charging
2221
Bekijk gratis de handleiding van Growatt SPE 6000-12000 US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPE 6000-12000 US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6565 MB |
