Growatt SPE 6000-12000 US handleiding
Handleiding
Je bekijkt pagina 11 van 33
Double check that all wiring is correct. Please put bottom cover back by screwing
four screws as shown below.
3.8 Final Assembly
3.9 Wiring system for inverter
4. Operation
4.1 Power ON/OFF
Aftercorrectinstallation,switchonthebatteryswitch,switchontheinverter
switch,waitabout40seconds, inverteroutput.
4.2 Display Panel Introduction
The operation and display panel, shown in below chart, is on the front panel of
the inverter. It includes three indicators, four function keys and a LCD display,
indicating the operating status and input/output power information.
1. LCD display
2. Status indicator
3. Charging indicator
4. Fault indicator
5. Function buttons
LCD display
LED Indicator
Messages
Green
Solid On
Output is powered by utility in Line mode.
Flashing
Output is powered by battery or PV in
battery mode.
Green
Solid On
Battery is fully charged.
Flashing
Battery is charging.
Red
Solid On
Fault occurs in the inverter.
Flashing
Warning condition occurs in the inverter.
Button
Description
ESC
To exit setting mode
UP
To go to previous selection
DOWN
To go to next selection
ENTER
To confirm the selection in setting mode or enter setting mode
Function Buttons
1615
Bekijk gratis de handleiding van Growatt SPE 6000-12000 US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPE 6000-12000 US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6565 MB |
