Growatt SPE 6000-12000 US handleiding
Handleiding
Je bekijkt pagina 10 van 33
3.5.2 PV cable Connection:
Please follow below steps to implement PV module connection:
1.Remove insulation sleeve 10 mm for positive and negative conductors.
2. then connect positive pole (+) of connection cable to positive pole (+) of PV
input connector, connect negative
pole (-) of connection cable to negative pole (-) of PV input connector.
3.6 Communication Connection
Please use supplied communication cable to connect to inverter and PC. Follow
on-screen instruction to install the monitoring software. For the detailed software
operation, please check user manual of software. The monitoring software is
downloadable from our website www.ginverter.com.
There is one dry contact(3A/250VAC) available on the rear panel. Dry contacts are
used to connect generators. As shown in the table below. When the inverter meets
the conditions on the left, it will perform the function on the right. It could be used
to deliver signal to external device When the following conditions are met.
3.7 Dry Contact Signal
Unit
Status
Condition
Dry contact
port:
NC & C
NO & C
If program 24 is set to automatic
Power Off
Unit is off and no output is powered
Close
Open
Power On
Output is powered from Utility
Close
Open
Output is
powered from
Battery or Solar
Program
01 set as
Utility first
Battery voltage (SOC)< Low
DC warning voltage(SOC)
Open
Close
Battery voltage(SOC) >
Setting value in Program 13
or battery charging reaches
floating stage
Close
Open
Program
01 is set
as SBU or
Solar first
Battery voltage (SOC)<
Setting value in Program 12
Open
Close
Battery voltage (SOC)>
Setting value in Program 13
or battery charging reaches
floating stage
Close
Open
If program 24 is set to enable
Power On
Output is
powered from
Battery or Solar
The dry contact always sends a power-
on signal.
Open
Close
If program 24 is set to disable
Power On
Output is
powered from
Battery or Solar
The dry contact always sends a power-
off signal.
Close
Open
14
13
Bekijk gratis de handleiding van Growatt SPE 6000-12000 US, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | SPE 6000-12000 US |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6565 MB |
