Growatt MID 10-30KTL3-XH handleiding
Handleiding
Je bekijkt pagina 52 van 55
Error code
Description
Troubleshooting
Error 411
Internal
communication
failure
1. Check the wiring of the communication board
after shutdown.
2. If the error message persists, please contact
Growatt support.
Error 412
Temperature
sensor
disconnected
1. Check if the temperature sensor module is
properly connected.
2. If the error message persists, please contact
Growatt support.
Error 416
DC/AC
overcurrent
protection
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 420
GFCI module
abnormal
1. Check the GFCI module after shutdown.
2. If the error message persists, please contact
Growatt support.
Error 424
INV current
waveform
abnormal
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 425
AFCI self-test
failure
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 426
PV current
sampling
abnormal
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 427
AC current
sampling
abnormal
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 428
BOOST short-
circuited
Please contact Growatt support.
Error 429
BUS soft start
failed
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
9291
Error 600
Off-grid output
short-circuited
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 601
Off-grid Bus Volt
Low
1. Check if the battery is working properly or the
battery experiences capacity loss.
2. If the error message persists, please contact
Growatt support.
Error code
Description
Troubleshooting
Error 602
Abnormal Volt at
the off-grid
terminal
1. Check if the battery is working properly or the
battery experiences capacity loss.
2. If the error message persists, please contact
Growatt support.
Error 603
Soft start failed
1. Restart the machine.
2. If the fault message still exists, contact the
manufacturer.
Error 604
Off-grid output
voltage abnormal
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 605
Balanced circuit
self-test failed
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 606
High DC
component in
output voltage
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 607
Off-grid output
overload
1. Restart the inverter.
2. If the error message persists, please contact
Growatt support.
Error 608
Off-grid parallel
signal abnormal
1. Check if the communication cables are
properly connected.
2. If the error message persists, please contact
Growatt support.
Error 609
Backup box is not
detected
1. After shutdown, check the signal wiring for
identifying the backup box.
2. If the error message persists, please contact
Growatt support.
Error 610
Off-grid split-
phase voltage
abnormal
2. Restart the system.
3. If the error message persists, please contact
Growatt support.
1. Power off the system and check if the backup
box split-phase transformer and the control relay
are abnormal.
Error 700
Abnormal
communication
between the
backup box and
the inverter
1. Power off the system and check if the backup
box split-phase transformer and the control relay
are abnormal.
2. Restart the system.
3. If the error message persists, please contact
Growatt support.
Bekijk gratis de handleiding van Growatt MID 10-30KTL3-XH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Growatt |
| Model | MID 10-30KTL3-XH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11746 MB |
