Handleiding
Je bekijkt pagina 24 van 37
●
NOTE
●
Sleep button
Time setting range: 0.5-24 hours.
Time interval between two operations can’t exceed 5s.
Otherwise, remote controller will exit the setting status
automatically.
Timer button
●
●
●
●
NOTE
Under Cool or Heat mode, press this button to turn
on Sleep function. Press this button again to cancel
Sleep function. Under Fan, Auto and Dry modes, this
function is unavailable.
Light button
no display
LED on LED off
Energy-saving function
Function introduction for
combination buttons
NOTE
Press this button to control the LED status on the
displayer, the circulation change is as follow:
At ON status, press this button once can set
TIMER OFF. The character of HOUR and OFF
will flash. Press "+" or "-" button within 5s can
adjust the time of TIMER OFF. After each
pressing of "+" or "-" button, time will increase or
decrease half an hour. When holding "+" or "-"
button, 2s later, the time will change quickly until
to reach to your required time. After that, press
"Timer" button to confirm it. The character of
HOUR and OFF won't flash again.
Cancel TIMER OFF: Press "Timer" button again
under TIMER OFF status.
At OFF status, press this button once can set
TIMER ON. Please refer to TIMER off for
detailed operation.
Cancel TIMER ON: Press "Timer" button again
under TIMER ON status.
8°C heating function
●
●
●
●
NOTE
Press this button continuously more than 2s, the main
unit will swing back and forth from left to right, and
then loosen the button, the unit will stop swinging and
present position of guide louver will be kep t immedi-
ately.
Under swing left and right mode, when the status is
switched from off to , if press this button again
2s later, status will switch to off status directly; if
press this button again within 2s, the change of swing
status will also depend on the circulation sequence
stated above.
This function only applicable for some models.
Under cooling mode, press "Mode" and "Timer"
buttons simultaneously to start up or turn off ener-
gy-saving function. When energy-saving function
is started up, "SE" will be shown on remote con-
troller, and air conditioner will adjust the set tem-
perature automatically according to ex-factory
setting to reach to the best energy-saving effect.
Press "Mode" and "Timer" buttons simultaneously
again to exit energy-saving function.
Under energy-saving function, fan speed is defaulted
at auto speed and it can't be adjusted.
Under energy-saving function, set temperature can't
be adjusted.
Sleep function and energy-saving function can't oper-
ate at the same time. If energy-saving function has
been set under cool mode, press "Sleep" button will
cancel energy-saving function. If sleep function has
been set under cool mode, start up the energy-saving
function will cancel sleep function.
- 20 -
Under 8°C heating function, fan speed is defaulted at
auto speed and it can't be adjusted.
Under 8°C heating function, set temperature can't be ad-
justed.
Sleep function and 8°C heating function can't operate
at the same time. If 8°C heating function has been set
under heat mode, press " " button will cancel 8°C
heating function. If sleep function has been set under
heat mode, start up the 8°C heating function will cancel
sleep function.
Under °F temperature display, the remote controller will
display 46°F heating.
Under heat mode, press "Mode" and "Timer" but-
tons simultaneously to start up or turn off 8°C heat-
ing function. When this function is started up, 8°C
will be shown on remote controller, and the air co-
nditioner keep the heating status at 8°C.
Press "Mode" and "Timer" buttons simultaneously
again to exit 8°C heating function.
Swing angle can't be selected for some models.
Swing function can be be turned on or turned off
for them.
This function is only available for some models.
This function is only available for some models.
(Not applicable for
this model)
(Not applicable for
this model)
Bekijk gratis de handleiding van Gree GWH18PZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gree |
| Model | GWH18PZ |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3700 MB |
