Gossen Metrawatt PROFITEST EMOBILITY handleiding

Niet gecategoriseerd

Gossen Metrawatt

22 pagina's

PDF beschikbaar

Handleiding

8 | 22

The Instrument

4.5 Operating Overview

4.6 Relevant Standards

The test adapter has been manufactured

and tested in accordance with the following

safety regulations:

Fault Selection

Interrupted phase

Reversed wires

Mains disconnect, mode 2/3

– for R

ISO

measurement

Mains connect, mode 2 charging cable

– for fault simulation

– for R

measurement

– for tripping test with I

nom

and measurement of time to trip

Orange switch positions: Measurements/tests at single-phase, mode 2/3 cables

Green switch positions: Measurements/tests at 3-phase, mode 2/3 cables

Top Switch

Bottom Switch

Status B, C, E

Riso

charging cable

DIN EN

60529

Degrees of protection provided by enclosures

(IP code)

DIN EN

61010-1

Safety requirements for electrical equipment

for measurement, control and laboratory use –

Part 1: General requirements

DIN EN IEC

61557-2

Electrical safety in low voltage distribution sys-

tems up to 1000 V AC and 1500 V DC –

Equipment for testing, measuring or monitor-

ing of protective measures

DIN EN

61557-4

Electrical safety in low voltage distribution sys-

tems up to 1000 V AC and 1500 V DC–

Equipment for testing, measuring or monitor-

ing of protective measures– Part 4: Resis-

tance of earth conductors, protective conduc-

tors and equipotential bonding conductors

DIN EN

61557-16

Electrical safety in low voltage distribution sys-

tems up to 1000 V AC and 1500 V DC –

Equipment for testing, measuring or monitor-

ing of protective measures –

Part 16: Devices for testing the effectiveness

of protective measures of electrical devices

and/or electrical medical devices

DIN EN IEC

61851-1

Electric vehicle conductive charging systems

Part 1: General requirements

Bekijk gratis de handleiding van Gossen Metrawatt PROFITEST EMOBILITY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.