Goodwe Polaris BMT-P2/144A handleiding
Handleiding
Je bekijkt pagina 10 van 36
BMT-P2/144A(550W)P10
STANDARD INSTALLATION MANUAL FOR POLARIS 580W (HOOP INSTALLATION)
FIGURE 1
Purlin installation：
● The specications of the purlins should meet the structural calculation strength, and the side
of the purlin installed with the product should be at, with a width of about 40mm;
● The spacing between the purlins should be installed from bottom to top according to the
dimensions shown in the Figure. The connection between the purlins should be rm, straight,
and have a smooth suace. When the lowest row of products extends out of the eaves, the
distance between the bottom purlin and the lower end of the main keel should be dim=650mm.
The spacing between adjacent purlins should be A=1200mm and B=1093mm. The actual
installation deviation of the adjacent purlin spacing should be ≤ 5mm. The distance between
the upper end of the purlin and the steel structure roof ridge line should be dim=560mm. The
steel structure installation cross-section is shown in Figure 2.
FIGURE 2
dim
dim
dim
1200
1093
1093
1200
1200
Bekijk gratis de handleiding van Goodwe Polaris BMT-P2/144A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Goodwe |
| Model | Polaris BMT-P2/144A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8693 MB |
