GLP WildBar 16 handleiding
Handleiding
Je bekijkt pagina 10 van 23
www.glp.de Wild Bar 16
10 Wild Bar 16 User Manual
● Strobe pixel random (only available when the fixture is set to a DMX mode with
individual pixel control) strobes individual pixels at random to give a kind of sparkling
effect. Speed can be adjusted from slow to fast.
● Strobe random strobes all of one fixture’s pixels together at random intervals,
allowing a random strobe between multiple fixtures. Speed can be adjusted from
slow to fast. Note that the random effect across multiple fixtures really is random!
● Strobe strobes all of one fixture’s pixels together and also perfectly synchronizes the
strobe in multiple fixtures so that all the fixtures flash at exactly the same time.
Speed can be adjusted from slow to fast.
Note: If the Main Link setting is set to Normal, the dimmer and shutter channels of the
Main module will act as master controls for the Sub Fixtures .
Pattern Engine
The Wild Bar 16 offers a wide range of static and dynamic pre-programmed FX patterns
on the Sub modules. The Sub module color control channels define the color of the
pattern effects.
A static pattern is a fixed pattern with only one pattern step. This allows you a very quick
selection of a non-dynamic effect. It has active and inactive pixels. Each active pixel
shows the selected pattern color while each inactive pixel is fully transparent.
A dynamic pattern is a sequence of multiple pattern steps and has active and inactive
pixels. Each active pixel shows the selected pattern color while each inactive pixel is fully
transparent. You can set pattern steps to automatically change continuously (Pattern
Speed) or you can directly select pattern steps (Pattern Index).
Pattern selection
The pattern selection channel offers a choice of 59 static patterns, 50 dynamic patterns
and 11 special patterns. The dynamic patterns offer multiple pattern steps for individual
step selection or continuous pattern step chasers.
Pattern 0 (DMX 000) is the idle pattern and just sets all pixels to active.
The Random Pixel FX pattern at the end of the Pattern Select channel randomly selects
pixels to create an attractive sparkle effect.
Pattern speed/index
As a dynamic pattern is a sequence of multiple pattern steps, you can select either:
● an automatic clockwise or counterclockwise continuous run-through of the pattern
steps with different speeds (dynamic speed control = DMX values 002 … 127), or
● one of the available specific pattern steps (static indexing = DMX values 128 … 255).
Note: Bear in mind that different patterns can have a different number of pattern
steps. This can affect synchronization between fixtures, for example, if you run different
patterns in multiple fixtures.
Pattern step crossfading
The Pattern Step Crossfading channel lets you choose how one step in a pattern should
change into the next step. This change can be a snap, a normal crossfade or a fade with
tail (quick fade in and variable long fade out).
Bekijk gratis de handleiding van GLP WildBar 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | WildBar 16 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2741 MB |
