GLP JDC1 handleiding
Handleiding
Je bekijkt pagina 23 van 76
German Light Products®
JDC1 User Manual Rev. 20240830-01 23
Securing with a safety cable
If the fixture can cause injury or damage if it falls, secure it with a secondary
attachment such as a safety cable that is approved for the weight of the fixture as
soon as you have fastened it in position.
To secure the fixture:
See illustration below. Attach a safety cable to the safety cable attachment point
in the fixture base and loop it around the truss chord or bar so that it will hold the
fixture if one or both of the rigging clamps fail. Take up as much slack as possible in
the safety cable (by looping it more than once around a truss chord, for example).
Figure 5: Safety cable attachment point
Make sure that the fixture is secure and that the head will not collide with any
objects when it tilts.
Connecting to power
The AC mains power supply must include a connection to ground / protective earth. It
must be protected against ground / earth leakage and overload. The autosensing
power supply accepts AC power at 100-240 V, 50/60 Hz. Do not connect the fixture to
power at any other voltage or to an external dimmer.
The JDC1 does not have a power ON/OFF switch. Power is applied to the fixture as
soon as the power cable becomes live.
The JDC1 has a 3-conductor Neutrik powerCON TRUE1 socket that accepts AC power
from a TRUE1 female cable connector. Although TRUE1 connectors support hot-
plugging, it is still good practice to shut down power to power cables or move Power
ON/OFF switches to OFF before connecting power cables to fixtures.
To connect the fixture to power:
If possible, shut down power to the power input cable.
See Figure 2 on page 11. The Neutrik powerCON TRUE1 AC mains power input
socket is located on the base of the fixture. Note the position of the keys and
keyways on the TRUE1 connectors. Line them up carefully, then connect the power
input cable to the power input socket by inserting the cable connector and
twisting clockwise to lock.
Bekijk gratis de handleiding van GLP JDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9927 MB |
