GLP JDC1 handleiding
Handleiding
Je bekijkt pagina 24 van 76
www.glp.de
24 JDC1 User Manual Rev. 20240830-01
Check that the head is unlocked and can move freely and check that nobody is
looking directly into the front of the fixture. Apply power to the fixture by energizing
the power cable.
To disconnect the power cable, pull the latch on the cable connector outwards to
release it, then twist the connector counterclockwise and remove it from the socket.
Installing power connectors
It is possible to install a cord cap / mains power plug that is suitable for your local
convenience receptacles / mains power sockets on the supplied power input cable. If
you do this, check that the cord cap / plug is rated minimum 250 V, 16 A, that it has a
connection to ground / earth and that it has an integral cable grip. Follow the cord
cap / plug manufacturer’s assembly instructions.
If you need to install a Neutrik powerCON TRUE1 connector on a power cable, follow
the instructions given in the Support area of the Neutrik website at www.neutrik.com.
Respect the color coding used in the supplied power cable and in your local mains
power wiring system. US and EU systems use the color coding shown below:
Live or L
Neutral or N
Ground / Earth or
US system
Black
White
Green
EU system
Brown
Blue
Yellow/green
Main fuse
See Figure 2 on page 11. The main fuse sits in a holder in the base.
If the fixture appears to be completely shut down even though power is applied, the
main fuse may have blown. Disconnect the fixture from power before replacing the
fuse. Replace only with a fuse of the same type and rating.
Bekijk gratis de handleiding van GLP JDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9927 MB |
