GLP JDC1 handleiding
Handleiding
Je bekijkt pagina 22 van 76
www.glp.de
22 JDC1 User Manual Rev. 20240830-01
Mounting upright on a level surface
The JDC1 may be placed upright on a level surface.
Make sure that persons cannot accidentally touch the
fixture when it is installed.
See illustration on right. You can align fixtures side by
side by inserting the alignment pins (arrowed) on the
right-hand side of one fixture into the holes on the left-
hand side of the next fixture.
Suspension or horizontal/angled truss mounting
You can fasten the JDC1 to a rigging truss with the head hanging vertically
downwards, or you can fasten the JDC1 to a truss horizontally or at any angle. To
fasten to a truss:
Bolt two suitable half-coupler rigging clamps to the supplied omega clamp
attachment bracket.
See illustration above. Fasten the omega bracket to the base of the fixture with
four Camlock quarter-turn fasteners by lining up the pins in the fasteners with the
keyways in the sockets, inserting the pins into the sockets and turning a full 90°
clockwise to lock them.
Fasten the rigging clamps securely around a chord on a rigging truss or similar bar.
Secure as directed below.
Figure 10: Camlock sockets
Figure 9: Alignment pins
Bekijk gratis de handleiding van GLP JDC1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 9927 MB |
