GLP JDC Line 1000 handleiding
Handleiding
Je bekijkt pagina 30 van 72
www.glp.de
30 JDC Line 1000 DMX Channel Index
DMX Mode 4: White + RGB Strobes + W
Pixel
94 DMX Channels
White segments overall control gives
overall output control for each Strobe
of the individually controllable White
segments available for that Strobe (see
below). It offers the standard strobe
channels for intensity and strobe
effects.
RGB strobe with FX runs on the RGB
segments only of each Strobe
independently. An RGB effects engine
with 50 patterns can be operated on
each Strobe independently.
The strobes let you control crossfading
(duration of changes between the
steps in each pattern) and transition
(duration of changes from one pattern
to the next).
Pattern chain length lets you set up a
chain of fixtures for the pattern to run
across – it defines the total number of
fixtures in the chain. Pattern chain
position lets you set which position in
the chain the fixture will occupy: first,
second or third etc. fixture in the chain.
The JDC Line 1000 occupies two
positions as if it was two JDC Line 500s.
Strobe phase lets you shift the timing of
each RGB Strobe (A or B) by 1 – 359°
relative to the corresponding White
Strobe (A or B). A 180° shift will result in
a flip-flop between white and RGB
flashes.
Pattern phase lets you shift the timing
of the RGB pattern by 1 – 359° relative
to the White pattern.
Background color sets a background
color on the RGB segments of each
Strobe. As standard, the main color
output always has higher priority than
the background color. You can define
how background color and main color
Mode 4
White + RGB Strobes + W Pixel
Strobe A White segments overall control
1
Intensity coarse
2
Intensity fine
3
Duration
4
Flash rate (Shutter)
5
Intensity effects (Strobe mode)
6
Control / Settings
Strobe A RGB strobe with FX
7
Intensity coarse
8
Intensity fine
9
Duration
10
Flash rate (Shutter)
11
Intensity effects (Strobe mode)
12
CTC
13
Red
14
Green
15
Blue
16
Pattern select
17
Pattern step / speed
18
Pattern step crossfade
19
Pattern transition
20
Pattern chain length
21
Position in chain
22
Strobe phase
Strobe A Background color
23
Intensity background
24
Red background
25
Green background
26
Blue background
27
White background
Strobe A White segments individual
control
28
White segment 01
…
…
47
White segment 20
Bekijk gratis de handleiding van GLP JDC Line 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | JDC Line 1000 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 12188 MB |
