GLP impression X5 handleiding

Verlichting

GLP

84 pagina's

PDF beschikbaar

Handleiding

www.glp.de   
8  impresssion X5 User Manual 
Pan and tilt position feedback and self-correction 
The fixture has a pan/tilt position feedback and self-correction system that brings the 
head back to its correct position if it was unintentionally moved. When correcting pan 
and/or tilt, the fixture at first tries twice to move to the correct position. If it cannot 
move to this position, it waits for a short period and then tries again. Position feedback 
is automatically disabled for a short time if you press one of the control panel buttons 
on the yoke. This feature lets an operator move the yoke manually for more 
convenient use of the control panel and display. Pan and tilt remain automatically 
disabled while you are using the fixture’s control panel.  
Position feedback can also be set to constantly disabled using the Fixture Settings → 
Position Feedback setting (see Pan/Tilt disable’ on page 21 or via DMX on the 
Special/Control channel. 
Fixture performance and speed options 
You can adjust the speed (and noise level) of pan and tilt movement, as well as the 
speed of all other mechanical effects, by selecting from three different performance 
options (see ‘Performance modes’ on page 19). 
Zoom 
The impression X5 has motorized zoom control. Control on the Zoom DMX channel 
moves from spot to flood as the DMX value increases. 
You can adjust the speed (and noise level) of zoom movement, as well as the speed 
of all other mechanical effects, by selecting from three different performance options 
(see ‘Performance modes’ on page 19). 
Main and Sub modules 
Some control modes divide the fixture into two or more modules or layers (Main 
module and Sub modules). For example, Control Modes 2-4 divide the Washlight into: 
●  Main module (Layer 1 = one RGB(L) Wash fixture)  
●  Sub module (Layer 2 = pattern engine with segment or individual pixel control). 
The Sub module has its own intensity and shutter channels. Professional controllers will 
handle this setup in a smart multi-fixture profile. 
The Sub module mode setting lets you decide whether the Sub module should be 
subordinate to or independent of the Main module (see ‘Sub module mode / Sub 
fixture mode’ on page 19). 
Individual Segment or Pixel Control 
The impression X5 provides nineteen individually controllable pixels. Each pixel cell 
houses a 40 W RGBL LED that can be controlled individually in intensity and color to 
create dynamic effects and pixel mapping.  
The fixture’s different DMX control modes offer different options for working with the 
individual segments or pixels.  

Bekijk gratis de handleiding van GLP impression X5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.