GLP impression X5 handleiding

Verlichting

GLP

84 pagina's

PDF beschikbaar

Handleiding

German Light Products®     
  Rev. 20240207-01  7 
  Features 
Light source 
The impression X5 features a powerful light engine containing 19 x 40 W RGBL LEDs. 
Control options 
The impression X5 is compatible with DMX 512 and RDM control protocols. Other 
control options via Ethernet are currently in preparation for inclusion in a future 
firmware release. 
The fixture also features GLP iQ.Mesh and GLP’s FPO (Flexible Protocol Option) Port. The 
GLP iQ.Mesh Module allows easy configuration, control, service and maintenance via 
the GLP iQ.Service App. The FPO port allows you to use control options such as 
LumenRadio CRMX if a CRMX module accessory is installed. The CRMX module and 
other FPO modules can be supplied on request – GLP Service can give details. 
Powering on 
When power is applied to the fixture and no valid DMX signal is present, the head 
moves automatically to its home position (pan center/tilt center).  
Pan and tilt 
The impression X5 has motorized pan and tilt movement with coarse and fine control 
channels. 
Pan and tilt range 
For details of pan and tilt angles, see the technical specifications in the impression X5 
Quick Start and Safety Manual supplied with the fixture and available for download 
from www.glp.de. 
It is possible to change the pan range from the standard angle to the maximum 
possible angle using the Fixture Settings → Pan range setting (see ‘Pan Range’ on 
page 22).  
Tilt range can be limited using the Fixture Settings → Accessory setting (see 
‘Accessories and tilt range’ on page 22) to avoid damage if an external accessory is 
installed on the head 
Direction of pan and tilt movement 
With the fixture standing on the ground, increasing the pan DMX value moves the yoke 
clockwise from its home position. Pan direction can be reversed using the Fixture 
Settings → Pan Invert setting (see ‘Pan invert’ on page 21) or via DMX on the 
Special/Control channel. 
With the fixture standing on the ground, increasing the tilt DMX value moves the head 
towards the front from its home position. Tilt direction can be reversed using the Fixture 
Settings → Tilt Invert setting (see ‘Tilt invert’ on page 21) or via DMX on the 
Special/Control channel. 

Bekijk gratis de handleiding van GLP impression X5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.