GLP impression X5 IP handleiding

Verlichting

GLP

41 pagina's

PDF beschikbaar

Handleiding

www.glp.de    X5 IP 
  Rev. 20250129-01  9 
●  Mode 2 (Normal) adds a Sub module as a second layer with pattern effects and 
color mixing control of all the fixture’s pixels together as one segment.  
●  Mode 3 (Segment) adds a Sub module as a second layer with pattern effects 
and color mixing of three segments: the center pixel plus the inner and outer 
rings. 
●  Mode 4 (Multipixel Advanced) adds a Sub module as a second layer with 
pattern effects and RGB color mixing of each individual pixel. 
●  Mode 5 (Multipix Compressed RGB) is a pixel mapping mode which offers the 
main overall control options plus RGB color mixing of each individual pixel. 
●  Mode 6 (Multipix Compressed RGBL) is a pixel mapping mode which offers the 
main overall control options plus RGBL color mixing of each individual pixel. 
In Modes 4, 5 and 6, the fixture always operates in the Independent Mode setting 
(see ‘Sub module mode / Sub fixture mode’ on page 19). 
Color mixing 
The fixture’s Main module features 16-bit color mixing with RGB, RGBL or x;y (CIE 
1931) Color Mix control options. See ‘Color Mix modes’ on page 15. 
Note: The Color Mix mode of the Sub module(s) is always RGB. For more details, see 
‘Color Mix modes’ on page 15. 
iQ.Gamut 
iQ.Gamut is a new LED calibration technology from GLP that defines the color 
gamut for the color mix channels. You can select one of a range of calibrated 
iQ.Gamuts for the fixture to work within. This feature can be useful if you want to 
reproduce correct colors or avoid TV camera clipping. See ‘iQ.Gamut’ on page 18. 
Mix Priority 
The Mix Priority channel defines how the color mixing output of the Main module 
(Layer 1) and the color mixing output of the Sub module(s) (Layer 2) are merged 
together – or which value has higher priority. This lets you switch between the 
layers or create special effects using both layers. 
The Mix Priority channel gives the following options: 
●  Main Module + Sub Module HTP – The fixture takes whichever color value of the 
Main module or Sub module is highest and uses that value to determine the 
output color (Highest Takes Priority). 
●  Main Only – The Sub module color value is ignored. The fixture uses the color 
value of the Main module. 
●  Sub Only – The Main module color value is ignored. The fixture uses the color 
value of the Sub module. 
●  Main + Sub additive – The Sub module color value is added to the Main module 
color value. The fixture uses the sum of both values. 
●  Main minus Sub subtractive – The Sub module color value is subtracted from 
the Main module color value. 

Bekijk gratis de handleiding van GLP impression X5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.