GLP impression X5 IP handleiding
Handleiding
Je bekijkt pagina 10 van 41
www.glp.de X5 IP
10 impression X5 IP User Manual
● Sub minus Main subtractive – The Main module color value is subtracted from
the Sub module color value.
● TrueColor Main over Sub Snap – The Sub module color stays in the background.
The Main module color has higher priority and will not mix with Sub module
color. As soon as the Main module color value is greater than zero, the Sub
module color blacks out and the fixture uses the Main module color.
● TrueColor Sub over Main Snap – The Main module color stays in the
background. The Sub module color has higher priority and will not mix with the
Main module color. As soon as the Sub module color value is greater than zero,
the Main module color blacks out and the fixture uses the Sub module color.
● TrueColor Main over Sub Crossfade – The Sub module color stays in the
background. The Main module color has higher priority. If you fade in a Main
module color, the Sub module color will crossfade to the Main module color.
● TrueColor Sub over Main Crossfade – The Main module color stays in the
background. The Sub module color has higher priority. If you fade in a Main
module color, the Sub module color will crossfade to the Main module color.
● Main Module only – Only Main Module color is used. Sub Module color is
ignored.
● Crossfading Main → HTP – Manual crossfade from Main module color only →
Main and Sub module color HTP
● Main and Sub module HTP – Main and Sub module color HTP (highest DMX
value takes priority)
● Crossfading HTP → Sub – Manual crossfade from Main and Sub module color
HTP → Sub module color only.
● Sub Module only – Only Sub Module color is used. Main Module color is ignored.
White point
The white point is the default white that is obtained when the shutter is opened.
The impression X5 IP offers a choice of fixed white points in RGB Color Mix Mode,
allowing convenient use in different environments. For details of setting the white
point, see ‘White point’ on page 17.
Color temperature control (CTC)
In addition to the choice of default fixed white point, the fixture offers Color
Temperature Correction (CTC) in all three color mixing control modes (RGB, RGBL
and x;y). The CTC Channel allows a temporary change of white point and offers a
smooth shift between whites from 10 000 K to 2 500 K following the black body line.
Depending on the selected Color Mix Mode (RGB, RGBL or x;y), if you select a color
temperature on the CTC channel, the fixture will no longer use the specific open
color and will instead use the selected color temperature.
If you select a color temperature on the CTC channel, it is still possible to adjust the
color temperature using the RGB and RGBL channels.
Bekijk gratis de handleiding van GLP impression X5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4489 MB |
