GLP impression X5 IP Bar 1000 handleiding

Verlichting

GLP

84 pagina's

PDF beschikbaar

Handleiding

www.glp.de X5 IP Bar 1000

24 impression X5 IP Bar 1000 User Manual

Manual DMX

Gives individual control of the fixture using the fixture user interface. The menu timeout

function is disabled as long this menu is open.

● Manual Control: Manually sets a DMX value for each function.

● Reset Manual values: Resets all manual control values to default.

External DMX values will always have higher priority than manual control commands.

Disconnect the fixture from the data source when using manual control.

Note: When entering manual control, be prepared for the fixture to start moving.

Service

The Service menu is split into two levels: Service and Service Advanced. The Service

Advanced level is for trained technicians only. Read the information below carefully

before entering this level.

The Service menu contains the following items:

● Live Diagnostic: Calls up an overview of all main fixture information, signal quality

and settings. This can be helpful while troubleshooting or talking to GLP Service.

● iQ.Service Connect: Wakes up the integrated GLP iQ.Mesh Module for 5 minutes

and enables connectivity to the GLP iQ.Service App.

● Test All: Runs a test sequence of all LEDs for a quick test of the fixture. Press BACK to

stop the test sequence.

● Test Tilt: Runs a test sequence of tilt movement only. Press BACK to stop the test

sequence.

● Test LED: Runs a test sequence of the LED pixel only. Press BACK to stop the test

sequence.

● Test Zoom: Runs a test sequence of Zoom functionality only. Press BACK to stop the

test sequence.

● Test Fans (Auto): Starts a fan self-test. Tries to detect fan errors, clears any current

errors if successful.

● Test Fans (Manual): Tests fans one by one manually.

● Test Encoders: Auto test for all encoders.

Advanced Service

The Advanced Service level is for trained technicians only. Read the information below

carefully before entering this level. You must confirm by pressing and holding ENTER for

3 seconds before you can enter this level.

The Advanced Service level contains the following items:

● Service Mode: Disables tilt and all display timeouts to make servicing the fixture

head easier. This mode is automatically disabled after a power cycle.

Bekijk gratis de handleiding van GLP impression X5 IP Bar 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.