GLP impression S500 Profile handleiding
Handleiding
Je bekijkt pagina 14 van 22
www.glp.de
14 impression S500 Profile HO/HC User Manual
● Signal source.
● Fixture’s current DMX address in large characters. If the fixture’s self-diagnosis
system detects an error, the fixture will flash an error message alternately with the
DMX address. This lets you see the DMX address and error message at a distance
from the fixture.
● The fixture displays network IP addresses below the DMX Address.
● Below the current DMX address, the fixture displays in smaller characters the DMX
channels that the fixture is currently using.
Using the control panel
The four control panel buttons under the display have the following functions.
In the main screen:
QUICK MENU – Activates the Quick Menu
UP/DOWN – Press three times to open the live diagnostic tool
MENU – Activates the control panel if it is in sleep mode, then
opens the main menu
When navigating through the menus:
BACK – Goes back one level towards the top of the menu
UP – Scrolls up or increments a number
DOWN – Scrolls down or decreases a number
ENTER – Confirms a setting or implements a command
At any time:
+
UP and DOWN at the same time – Temporarily rotates the display
180°
Bekijk gratis de handleiding van GLP impression S500 Profile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression S500 Profile |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2794 MB |
