GLP impression S500 Profile handleiding
Handleiding
Je bekijkt pagina 15 van 22
German Light Products®
Rev. 20250116-02 15
Control button shortcuts
Battery Eco Mode (available in Battery Mode only)
When the fixture is running on battery power, holding MENU and ENTER together for 10
seconds activates Battery Eco Mode. This switches off the display completely to avoid
discharging the battery and is useful when a fixture is put into long-term storage.
Live Diagnostics
Pressing UP or DOWN three times calls up an overview of all main fixture information,
signal quality and settings. This can be useful if you are troubleshooting or if you are in
contact with GLP Service.
Toggle Display Orientation
Pressing and releasing UP and DOWN together rotates the display through 180°.
Note: If Display Orientation is set to Auto, changing the display orientation by pressing
UP and DOWN only changes the display orientation until the next power cycle. To
change the display orientation permanently, use the Fixture Settings
→
Display
Orientation option.
Error Messages
If the fixture detects an error, it displays an error message in the display. The Error is
‘sticky’ and will continue to be shown in the display until the next power cycle or reset.
To get details of the error message, follow the information in the display. These details
are important if you talk to GLP service.
● Pressing ESC ignores the error message and exits the error display.
● Pressing ENTER shows information about the error.
Note: Make a note of any error message displayed. You may need these details for error
diagnosis. Please be ready to give them to GLP Service if necessary.
Certain critical error messages are permanently stored in the display. In this case, please
contact your GLP service agent.
When restarting the fixture or sending a RESET command, the fixture performs an
initialization process to test all functions and sensors. The fixture also continuously
checks itself for correct operation.
Loss of DMX signal
The display flashes if the DMX signal is lost (the fixture will then behave according to its
No Signal setting.
Service and maintenance
See the separate impression S500 Profile HO/HC Quick Start and Safety Manual
supplied with the fixture and available for download from www.glp.de for information
on service and maintenance.
Bekijk gratis de handleiding van GLP impression S500 Profile, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression S500 Profile |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 2794 MB |
