GLP impression FR1 handleiding
Handleiding
Je bekijkt pagina 7 van 36
German Light Products®
Impression® FR1 User Manual 7
Do not stare into the light output from the product. May be harmful to the eyes.
Do not look at the product’s light output with optical instruments or any device that
may concentrate the light output.
Make sure that persons working on or near the product are not looking directly into
the light output when the product lights up suddenly. This can happen when power is
applied, when the product receives a DMX signal, or when certain control menu
items are selected.
Provide well-lit conditions to reduce the pupil diameter of anyone working on or near
the product.
Strobe safety
Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with
photosensitive epilepsy. Do not use strobe effects for extended periods.
Comply with local regulations on the use of strobe lighting and notify the public in
advance with highly visible warning signs when strobe effects are used.
If a seizure occurs, stop using strobe effects. Seek professional medical help. Note the
time that the seizure starts and finishes. Call emergency medical help urgently if the
seizure lasts more than five minutes, if it is the person’s first seizure, or if the person is
injured. While waiting for help to arrive, consider the following general advice for
caring for a person who is having a seizure: Protect the affected person from injuring
themselves on hard or sharp objects. If necessary, move the person to a safe place.
Lay them on their side with their head supported to prevent it from hitting the floor.
Loosen any tight clothing around their neck. Do not use force to hold the person or
restrict their movements. Do not put anything in their mouth, including your fingers.
Installation safety and protection from personal injury
Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.
The product is not portable when installed.
Ensure that the supporting structure and installation hardware used can hold at least
10 times the weight of the load that they support.
Suspend the product with hardware specifically designed and rated for the purpose.
Check that the hardware is in perfect condition. Fasteners must be steel grade 8.8
strength or better. Rigging clamps must be half-coupler type that completely encircle
the rigging truss chord.
Bekijk gratis de handleiding van GLP impression FR1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4168 MB |
