GLP impression FR1 handleiding
Handleiding
Je bekijkt pagina 8 van 36
www.glp.de
8 impression® FR1 User Manual
Screws or bolts used for mounting hardware must protrude minimum 9 mm / 0.36 in.
and maximum 11 mm / 0.43 ins. into the threaded holes in the base of the fixture.
If the product is installed in a location where it may cause injury or damage if it falls,
install as directed in this manual a safety cable or similar secondary attachment that
will hold the product if a primary attachment fails. The secondary attachment must
be approved by an official body such as TÜV as a safety attachment for the weight
that it secures, it must comply with EN 60598-2-17 Section 17.6.6, and it must be able to
support a static suspended load that is ten times the weight that it secures.
Fasten the product to a structure or surface as directed in this user manual. Do not
use safety cables as the primary means of support.
Before applying power to the product, ensure that the moving head can move
through its full range without risk of collision. Allow a minimum center-to-center
distance of 360 mm / 14.2 in. between fixtures.
Check that all covers and rigging hardware items are secure.
Do not operate the product with missing or damaged covers, shields or any optical
component.
Restrict access below the work area and work from a stable platform whenever
installing, servicing or moving the product.
If the product becomes damaged, stop using it immediately and disconnect it from
power. Do not attempt to use a product that is obviously damaged.
Do not modify the product in any way not described in this user manual.
Install genuine GLP parts only.
Bekijk gratis de handleiding van GLP impression FR1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4168 MB |
