GLP impression FR1 handleiding
Handleiding
Je bekijkt pagina 13 van 36
German Light Products®
Impression® FR1 User Manual 13
increases fan speed to the level necessary to keep the fixture at optimum
temperature.
If light output is set to maximum intensity but the fans can keep the fixture at optimum
temperature, there will be no regulation of light intensity. If the fixture begins to
exceed optimum temperature, light intensity will be reduced until optimum
temperature can be maintained.
High mode is optimized for maximum light output and suits operation in high ambient
temperatures. Fans are set to constant operation at high speed and light output
intensity is regulated in order to keep fixture temperature at optimum level.
Besides maximizing light output in high ambient temperatures, you can use this mode
to cool down a fixture quickly or to remove dust from cooling fans.
Medium mode is suitable for low-noise operation in normal ambient temperatures.
Fans are set to constant operation at medium speed and light output intensity is
regulated in order to keep fixture temperature at optimum level.
Low mode is optimized for minimum noise. Fans are set to constant operation at low
speed and light output intensity is regulated in order to keep fixture temperature at
optimum level.
This mode gives an extremely low fan noise level, but if you use it in high ambient
temperatures there may be a noticeable reduction in light output intensity.
In all fan modes, if fixture temperature reaches a dangerous level, LEDs will be shut
down for a period until the fans have brought the temperature down to a safe level.
You can set the cooling fan mode using the control panel or the Control/Settings DMX
channel.
Movement performance
Three settings are available for the movement of mechanical effects (pan, tilt, zoom
etc.):
In Normal mode, movement is set to achieve a balance between speed, noise and
smoothness that will be best in average situations. This is the default setting.
In Fast mode, all movement is set to high speed. This mode gives impressively fast
effects, but noise levels will be higher than in Normal mode.
In Smooth mode, movement is optimized to obtain the smoothest action and lowest
noise. This mode gives super low-noise operation and smooth performance, but effect
movement is slower than in Normal mode.
You can select movement performance settings using the control panel or the
Control/Settings DMX channel.
No-DMX (behavior when the fixture is not receiving a DMX signal)
You can set the fixture to respond in four different ways if no DMX signal is present (if
the fixture is being controlled by DMX but the DMX signal stops, or if you apply power
to the fixture when no DMX signal is present):
Hold sets the fixture to continue obeying the last DMX values it received. This is the
default setting.
Bekijk gratis de handleiding van GLP impression FR1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4168 MB |
