GLP FUSION Stick FS16Z handleiding
Handleiding
Je bekijkt pagina 18 van 73
www.glp.de
18 Fusion FS 16Z User Manual Rev. 20240625-01
Please read ’Vertical hanging safety information’ on page 22 before linking fixtures
together.
Standing horizontally on a surface
The FS 16Z fixture can stand horizontally on the floor or other stable, horizontal surface.
Figure 6. FS 16Z standing horizontally (shown with glare shield installed)
To stand the FS 16Z fixture horizontally:
1. Install two FS 16Z Tilt Brackets on the fixture as described in ‘Attaching mounting
brackets to the fixture’ on page 16.
2. Loosen the handwheels on the brackets, adjust the brackets to a suitable angle as
shown in Figure 6 and tighten the handwheels.
3. Place the fixture on the surface. Make sure that it is safe and secure, and that it will
not present a danger of tripping or falling.
For instructions on installing an FS 16Z fixture standing vertically on a horizontal surface,
see ‘Vertical installation standing on a surface’ on page 25.
Bekijk gratis de handleiding van GLP FUSION Stick FS16Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Stick FS16Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 10685 MB |
