GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 8 van 33
www.glp.de
8 Fusion Creos Quick-Start and Safety Manual
Do not connect more than five (5) Fusion Creos fixtures linked together in a chain
to power at 200-240 V, 50 Hz.
• The voltage and frequency at the Mains OUT socket is the same as the voltage
and frequency applied to the Mains IN socket. Only connect devices to the Mains
OUT socket that accept this voltage and frequency.
Fire safety and protection from burns
• Do not operate the fixture if the ambient temperature (Ta) exceeds 45° C (113° F).
• The surface of the fixture can become hot during operation. Avoid contact by
persons and materials. Do not install the fixture in a location where there is a risk
of accidental contact. Allow the fixture to cool for at least 20 minutes before
handling
• Keep the fixture well away from flammable materials.
• Keep all combustible materials (e.g. fabric, wood, paper) at least 0.2 m (8 in.) away
from the fixture.
• Ensure that there is free and unobstructed airflow around the fixture.
• Do not illuminate surfaces within 1 m / 3.3 ft. of the fixture. The light output from
the fixture is powerful enough to cause burns or fire in illuminated objects at very
close range.
• Do not place any optical components other than Fusion Creos accessories from
GLP onto the front of the fixture.
• Do not stick filters, masks or other materials onto the fixture unless they are
supplied or approved by GLP. Do not block the light output in any way. The front
surface becomes hot during operation and can melt or ignite objects that are in
contact with the surface. Ensure that the front surface is clean and unobstructed
at all times in order to prevent a fire hazard and prevent damage to the fixture.
• The fixture’s optical components can focus the sun’s rays, creating a risk of fire
and damage. Do not expose the front of the fixture to sunlight or any other
intense light source, even from an angle.
Eye safety
• The Fusion Creos is classified as a Risk Group 2 lighting fixture according to EN
62471 at a distance of 1 m (3.3 ft.). Possibly hazardous radiation emitted. Do not
stare into the light output from the fixture. May be harmful to the eyes.
• Do not look at the fixture’s light output with optical instruments or any device
that may concentrate the light output.
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
