GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 9 van 33
www.glp.de
Rev. 20240917-01 9
• Make sure that persons near to or working on the fixture are not looking directly
into the light output when the fixture lights up suddenly. This can happen when
power is applied, when the fixture receives a DMX signal, or when certain control
menu items are selected.
• Provide well-lit conditions to reduce the pupil diameter of anyone working on or
near the fixture.
Strobe safety
• Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with
photosensitive epilepsy. Do not use strobe effects for extended periods.
• Comply with local regulations on the use of strobe lighting and notify the public
in advance with highly visible warning signs when strobe effects are used.
• If a seizure occurs, stop using strobe effects. Seek professional medical help. Note
the time that the seizure starts and finishes. Call emergency medical help
urgently if the seizure lasts more than five minutes, if it is the person’s first
seizure, or if the person is injured. While waiting for help to arrive, protect the
affected person from injuring themselves on hard or sharp objects. If necessary,
move the person to a safe place. Lay them on their side with their head
supported to prevent it from hitting the floor. Loosen any tight clothing around
their neck. Do not use force to hold the person or restrict their movements. Do
not put anything in their mouth, including your fingers.
Installation safety and protection from personal injury
• Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.
• The fixture is not portable when installed.
• Ensure that the supporting structure and installation hardware used can hold at
least ten times the weight of the load that they support.
• Fasten the fixture to a structure or surface only as directed in this manual and
only with hardware that is specifically designed and rated for its purpose. Do not
use a safety cable as the primary means of support. Check that installation
hardware is in perfect condition. Fasteners must be steel grade 8.8 strength or
better. Rigging clamps must be half-coupler type that completely encircle the
rigging truss chord.
• If the fixture is installed in a location where it could cause injury or damage if it
falls, install as directed in this manual a safety cable or similar secondary
attachment that will hold the fixture if a primary attachment fails. The secondary
attachment must be approved by an official body such as TÜV as a safety
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
