GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 23 van 33
www.glp.de
Rev. 20240917-01 23
8. Connecting to control system
Check that all cables and connectors are suitable for the installation environment
and application (see recommendations in ‘Avoiding damage to the fixture’ on page
11).
DMX512 control
The Fusion Creos supports the USITT DMX 512A control data signal protocol. Two 5-
pin XLR connectors are provided for IN and THRU connections on a DMX data link
using standard DMX protocol. Connectors use standard DMX pinout:
• Pin 1 = Ground
• Pin 2 = Negative / data cold
• Pin 3 = Positive / data hot.
• Pins 4 and 5 are not used.
We recommend the use of digital 110 Ohm DMX cable with original Neutrik 5-pin
TOP-type XLR connectors.
If you would like advice with planning and installing a DMX link, your GLP supplier
will be happy to provide assistance.
Art-Net and sACN control
The Fusion Creos supports Art-Net and sACN control over an ethernet network
connected to either of the etherCON connectors. Fixtures may be connected to the
network by individual cables back to an ethernet switch, or may be linked together
in daisy-chain by cabling into the first etherCON connector then linking out to the
next fixture from the second etherCON connector.
CRMX wireless control
The Fusion Creos supports wireless control using the LumenRadio CRMX protocol.
No connection is necessary but the fixture must be paired to the CRMX transmitter,
see the Fusion Creos User Manual for further information.
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
