GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 24 van 33
www.glp.de
24 Fusion Creos Quick-Start and Safety Manual
9. Starting and stopping operation
Warning! Before you apply power to the Fusion Creos or operate it after a
blackout, make sure that nobody is looking directly into the front of the
fixture and that there is sufficient clearance for the head to tilt safely.
The fixture’s TRUE1 TOP mains power input connector supports hot-plugging, and
connecting and disconnecting a live power cable is an option, especially if you need
to shut down power urgently, but it is still good practice to shut down power to the
AC mains power circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture and that
there is no risk of collision of the head tilts without warning, then apply power to the
AC mains power circuit.
To stop operation, shut down power to the AC mains power circuit.
Transportation and storage
We strongly recommend that you transport the fixture either in a flightcase or in its
original packaging to protect it from damage during transportation. The product
warranty does not cover damage caused by abnormal shocks during transportation
and handling. Release the tilt lock and support the head during transport.
When the fixture is not installed, disconnect it from power and store it in a dry
location.
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
