GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 18 van 33
www.glp.de
18 Fusion Creos Quick-Start and Safety Manual
See Figure 4 on the previous page. Fasten the safety cable to one of the arrowed
attachment points on the base of the unit.
If there is any danger that the fixture may swing dangerously from the safety
cable if a primary attachment fails, add a second safety cable as described
above, fastening it to the second safety cable eyelet.
Check that the fixture will now be caught safely by the safety cable if a primary
attachment fails.
Standing the fixture on a horizontal
surface
To place a Fusion Creos fixture standing
horizontally on a stable horizontal
surface:
Stand the fixture on the small feet in
the fixture’s base as shown in Figure 5.
Make sure that it is safe and secure,
and that it will not present a danger
of tripping or falling.
If there is any danger of injury or
damage if the fixture falls from the
surface, secure it with a safety
cable as described in ‘
Securing the fixture with a safety cable’ on page 17.
Installing on a rigging truss or similar structure
You can suspend a Fusion Creos fixture from a rigging truss or pipe using the
bracket that is supplied with the fixture and rigging clamps that are available from
GLP as optional accessories.
If you are going to install the fixture hanging vertically downwards from a horizontal
rigging truss or pipe, you can fasten it to the truss using G-clamps. If you are going
to install the fixture in any other orientation or if the rigging truss is not horizontal,
you must use half-coupler-type clamps that completely surround the truss chord or
pipe.
Rigging clamps must be approved for the weight that they will support.
To install the Fusion Creos on a rigging truss or pipe:
Check that the truss or pipe is secure and can safely hold ten times the weight
that it will support.
Figure 5. Fusion Creos
placed on a horizontal surface
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
