GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 17 van 33
www.glp.de
Rev. 20240917-01 17
6. Installation
Warning! Read ‘Safety’ starting on page 5 for important safety
information that you must understand before you install or operate the
fixture. Install Fusion Creos fixtures only as described in this chapter, or
you may create an installation that is unsafe.
It is the installer’s responsibility to provide a stable, secure supporting
structure that is suitable for the environment and application and that
meets all applicable codes and legal requirements. Note the requirement
to secure lighting fixtures with safety cables in temporary installations.
Mounting options
A Fusion Creos fixture may be installed in one of the following ways:
Standing horizontally on a horizontal surface.
Fastened to a rigging truss or similar structure at any angle using the supplied
brackets and two or more rigging clamps (optional accessories).
Securing the fixture with a safety cable
If a fixture can cause injury or damage if
it falls you must secure it with at least
one secondary attachment such as a
safety cable that will hold it if the
primary means of attachment fails. The
safety cable must be approved for the
weight that it secures. In multiple
installations, each fixture must have its
own safety cable.
To secure a Fusion Creos fixture with a
safety cable:
Obtain a safety cable that is
approved for the weight of the fixture
and rigging hardware that it will
secure.
Loop the cable around a secure
anchoring point such as a truss chord
or fixed structure so that it will catch
the fixture if a rigging clamp fails.
Take up as much slack as possible in
the safety cable (by looping it more
than once around the truss chord, for
example).
Figure 4. Safety cable attachment
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
