Handleiding
Je bekijkt pagina 7 van 42
12
13
INSTALL INSTRUCTION
Moving the appliance Tipps for energy saving
Parts and functions
Leveling feet
Changing the light
1. Remove all items from the appliance.
2. Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top of the
appliance.
3. Tape parts such as shelves and the door
to prevent from falling off while moving the
appliance.
4. Move the appliance with more than two people
carefully. When transporting the appliance over
a long distance, keep the appliance upright.
• For the most efficient use of energy, please keep the all internal items such as trays, drawers,
shelves and ice cube box on the position supplied by manufacturer.
• This refrigerating appliance needs to be installed independently and cannot be used as a
built-in. Otherwise, it will cause problems such the performance and life of the appliance are
reduced. And the manufacturer does not provide basic appliance warrant.
1. Small door
2. Temperature control knob
3. Glass shelf
4. Fruits and vegetables box
5. Leveling feet
6. Bottle box
Do not place the appliance near cookers, radiators
or other heat sources. If the ambient temperature
is high, the compressor will run more frequently
and for longer, resulting in increased energy
consumption.
Ensure that there is sufficient ventilation at the base
of the appliance, on the sides of the appliance and
at the back of the appliance.
Please also observe the spacing dimensions in the
chapter “Installation”.
The arrangement of drawers, shelves and trays
as shown in the product overview offers the most
efficient use of energy and should be retained as
far as possible.
To obtain a larger storage space (e.g. for large
refrigerated/frozen goods), the middle drawers
and shelves can be removed. The top and bottom
drawers and shelves should be removed last if
necessary.
An evenly filled refrigerator/freezer compartment
contributes to optimal energy use.
Allow warm food to cool before placing it in the
refrigerator/freezer compartment. Food that has
already cooled down increases energy efficiency.
Allow frozen food to defrost in the refrigeration
compartment The coldness of the frozen
food reduces the energy consumption in the
refrigerator compartment and thus increases the
energy efficiency.
Open the door only as briefly as necessary to
minimise cold loss. Opening the door briefly and
closing it properly reduces energy consumption.
Setting the temperature no colder than necessary
contributes to optimal energy use.
The door gaskets of your appliance must be
perfectly intact so that the doors close properly
and energy consumption is not increased
unnecessarily.
To avoid vibration, the appliance must be
leveled.
If required, adjust the leveling feet to compensate
for the uneven floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling feet can be turned easily by tipping the
cabinet slightly.
Turn the leveling feet counter clockwise
to raise the unit, clockwise
to lower it.
Any replacement or maintenance of the LED lamps
is intended to be made by the manufacturer, its
service agent or similar qualified person.
This product contains a light source of energy
efficiency class (G).
ATTENTION
ATTENTION
After connecting the power supply cord (or plug)
to the outlet, wait 2 or 3 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.
Differences: Due to technical changes and different models, some of the illustrations in this manual
may differ from your model.
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Bekijk gratis de handleiding van Glem Gas GRT110WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Glem Gas |
| Model | GRT110WH |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5082 MB |
