Giles GGF-400 handleiding
Handleiding
Je bekijkt pagina 20 van 99
11
Installation
GGF Series Gas Fryer
IMPORTANT!
The factoryinstalled regulator on the fryer controls gas pressure supplied to the gas valve as shown in Table 5
2.2. This regulator is rated for max. input pressure of 13.85” W.C. [ 3.45 kPa]. If supply line pressure exceeds
this maximum, a secondary regulator must be installed in the supply line, upstream of the installed regulator,
to maintain pressure at or below the maximum rating.
2.7.1 Typical Gas Supply Line Connection − continued
2.8. Gas Orifices: Information & Replacement Procedure
Gas flow varies at different elevations. If elevation is greater than those stated above, orifices must be changed to
an appropriate size. To confirm that proper orifices are installed or to exchange, follow the steps below. Orifices
are available from Giles (call factory at 800.554.4537) ... it is also possible that they can also be sourced locally ...
consult charts below or label on fryer rear panel.
IMPORTANT!
The fryer is manufactured & shipped with standard gas orifices for operation as follows:
Natural Gas: Sea Lvl to 3,000 feet AMSL
LP Gas: Sea Lvl to 4,000 feet AMSL
Verify the elevation of the installation site.
Changing type of fuel gas will require a proper Conversion Kit ... contact factory.
Continued on Next Page
Bekijk gratis de handleiding van Giles GGF-400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giles |
| Model | GGF-400 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31766 MB |
