Genesis GLMT20BH handleiding
Handleiding
Je bekijkt pagina 6 van 32
FIG 1
1. ON/OFF Switch
2. Accessory Quick-Change Lever
3. LED Work Light
4. Blade Clamp
5. Charger
6. Battery Pack
7. Battery Fuel Gauge
8. Battery Lock Tab
9. Speed Control
1
2
9
8
7
6
4
3
5
ENGLISH
SPECIFICATIONS
PRODUCT OVERVIEW
UNPACKING & CONTENTS
IMPORTANT: Due to modern mass production techniques, it is unlikely the tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure
to do so could result in serious personal injury.
CONTENT IN PACKAGE
Description Quantity
Oscillating Multi-Tool 1
Triangular Sanding Pad 1
Triangular Sandpaper 12
1-3/4" Coarse Tooth Flush Cut Blade 1
1-3/8" Bi-metal Flush Cut Blade 1
Motor Power ..................... 20V DC, Brushless
No-Load Speed .................10,000 - 19,000 OPM
Oscillation Angle ............... 3.5
o
Battery ........................ 20V Lithium-ion, 2.0Ah
Charger ....................... 120V~/60Hz, 1.7A
Net Weight ................... 3.0 lb.
Accessory Storage Box 1
Battery Pack GLAB2020B 1
Charger 1
Operator’s Manual 1
Description Quantity
• Use designated battery packs (Genesis™
- Model GLAB2020B or GLAB2040B) and
charger for this tool. Use of any other batteries
may result in a risk of fire.
WARNING: Read and understand all
warnings, cautions and operating instructions before
using this equipment. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
SPECIFIC SAFETY RULES FOR CORDLESS OSCILLATING MULTI-TOOLS
Bekijk gratis de handleiding van Genesis GLMT20BH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GLMT20BH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6650 MB |
