Genesis GLMT20BH handleiding
Handleiding
Je bekijkt pagina 5 van 32
5
ENGLISH
SPECIFIC SAFETY RULES FOR CORDLESS OSCILLATING MULTI-TOOLS
WARNING: Do not let comfort or
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING: Hold the tool by insulated
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator!
• Do not leave the tool running.
Operate the tool
only when hand-held
.
• Be aware that this tool is always in an
operating condition
,
because it does not have to
be plugged into an electric outlet.
• When operating the tool from an elevated
position
,
be aware of people or things beneath you.
• Check your work area for proper clearances
before cutting. This will avoid cutting into your
workbench, the floor, etc.
• Do not cut nails or screws unless you are using
a blade specifically designed for this purpose. Inspect
your material before cutting.
• Before switching on the tool, be sure the blade
is not contacting the work piece.
• Do not use the tool if the switch does not
turn it on or off. Any tool which can not be controlled
by the switch is dangerous and must be repaired.
• Do not wet-sand with this tool. Water or
moisture entering the motor housing can cause electric
shock and serious personal injury.
• Wear eye and hearing protection.
Always
use safety glasses with side shields. Unless otherwise
specified, everyday glasses provide only limited impact
resistance, they are not safety glasses. Use only certified
safety equipment; eye protection equipment should
comply with ANSI z87.1 standards. Protective hearing
equipment should comply with ANSI s3.19 standards.
• Protect your lungs
.
Wear a face or dust mask if
the operation is dusty. Following this rule will reduce the
risk of personal injury.
• Always disconnect battery pack from tool
or place the switch in the locked or off position before
any assembly, adjustments or changing of accessories.
Following this instruction will reduce the risk of serious
personal injury.
• Do not place battery tools or their batteries
near fire or heat.
This will reduce the risk of
explosion and possibly personal injury.
• Never use a battery which has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
SYMBOLS
SYMBOL DESCRIPTION SYMBOL DESCRIPTION SYMBOL DESCRIPTION
V
Volts
RPM
Revolutions per
minute
Warning symbol. Precautions that involve
your safety
A
Amperes
SPM
Strokes per
minute
To reduce the risk of injury, read Operator's
Manual before using this product
Hz
Hertz
OPM
Oscillations per
minute
Wear safety glasses, ear protection and
respiratory protection
W
Watts
or A.C.
Alternating
current
Do not dispose with household waste
No Load Speed
or D.C.
Direct current Do not touch the running blade
kg
Kilograms
Do not use in
wet conditions
Class II Double Insulated construction
H
Hours
Battery cannot
exceed 59 °C
This symbol designates that this product is
listed with U.S. and Canada requirements
by ETL testing Laboratories, Inc.
.../min
Per minute
Do not put
battery in fire
IMPORTANT: Some of the following symbols may be used on your product and appear throughout the manual.
Please study them and learn their meaning for critical information to operate the tool safely.
Bekijk gratis de handleiding van Genesis GLMT20BH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GLMT20BH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6650 MB |
