Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 47 van 134
47
1. Access the Web interface for the Sender unit.
2. Log in as “Administrator.”
3. Click the Functions tab.
4. Locate the USB over IP group and make sure the Enable USB over IP box is
checked. This is the default setting.
5. Click the Active on link radio button within the USB over IP group.
6. Click the Apply button within the USB over IP group.
7. The following message will be displayed, at the top of the page, indicating that the
new Serial over IP options have been applied.
8. Click the Reboot button at the bottom of the page. If the Reboot button is not
clicked, the following message will be displayed, indicating that the unit must be
rebooted.
9. Repeat steps 2 - 8 for the Receiver unit.
K/M over IP Compatibility Mode
When a Sender or Receiver unit is placed in “compatibility mode,” video wall functions
will be disabled.
1. Access the Web interface of a Sender or Receiver unit.
2. Log in as “Administrator.”
3. Click the Functions tab.
USB Control
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
