Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 46 van 134
46
The next example will consist of switching USB control between two Receiver units.
Using the diagram above, Receiver unit R1 will have USB control.
To assign USB control to another Receiver unit, follow the steps below.
Active per Request Mode
1. Press and hold the CH + USB button on the desired Receiver unit for at least two
seconds.
2. The message “Starting USB” will appear on the connected display.
R
2
S
1
IN
S
2
IN
S
3
IN
OUT
USB
CABLE
R
1
07 07
05 07 09
OUT
3. In order to assign USB control to a different Receiver unit, repeat steps 1 - 2.
Important: If switching between Active per request mode and Active on link mode, the
Apply and Reboot buttons must be clicked to apply changes.
Active on Link Mode
Under Active on link mode, a maximum of four USB devices can be used within a
system. In the diagram, on the previous page, the system is already using the maximum
number of USB devices (2 USB devices per Receiver). If we had two more Receiver units
(making a total of four Receiver units), we would only be able to connect one USB device
to each Receiver unit. To switch to Active on link mode:
USB Control
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
