Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 17 van 134
17
Notes:
• By default the unit will obtain the LAN 2 IP address via DHCP. If you are unsure of the
unit’s current LAN 2 IP address, please check the unit’s HDMI status display.
• If the unit’s IP address is changed then the IP address required for Telnet access will also
change accordingly.
UDP Settings
Congure the desired control system for UDP.
• UDP Port: Enter the local UDP listening port in this eld (50007 by default).
• Enable UDP Access: Select to enable UDP access.
• Remote UDP IP Address: If enabling Remote UDP Access, enter the remote UDP IP
address here. This IP address should be the same as the control system. The default
IP address is 192.168.1.255.
• Remote UDP Port: If enabling Remote UDP Access, enter the remote UDP listening
port here. The default remote UDP listening port is 50008.
• Enable Remote UDP Access: Select to enable remote UDP access. This feature
needs to be enabled only if feedback to the matrix is required. Otherwise, this feature
can be disabled.
• Apply: Click this button to save all changes on this page and reboot the controller.
TCP/UDP Conguration
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
