Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 16 van 134
16
TCP/UDP Conguration
Click the Network Settings tab within the web interface to access the TCP and UDP
settings page.
TCP/Telnet Settings
Before attempting to use Telnet control, please ensure that both the unit and the PC are
connected to the same active networks.
• Enable Telnet/TCP Access: Select to enable (default) or disable TCP access.
• TCP/Telnet Port: Enter the Telnet listening port in this eld (Port 23 by default).
• Login Message: Click these buttons to show or hide the Telnet welcome message at
the beginning of each Telnet session.
• Login Password: Click these buttons to enable or disable login credentials for TCP
access.
• Apply: Click this button to save all changes on this page.
To access the Command Line Interface (CLI):
1. In Windows 10/11, click Start > Run, type cmd and press Enter.
-OR-
In Mac OS X, click Go > Applications > Utilities > Terminal.
2. Once in the CLI, type telnet followed by the IP address of the unit (and the port
number if it is non-standard), and then press Enter. This will connect us to the unit
we wish to control.
TCP/UDP Conguration
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
