Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 15 van 134
15
16. Click the Login button. The Network will automatically be selected. The current IP
Mode will be highlighted within the IP Setup window group.
17. Click the desired IP Mode button.
• If Static mode is selected, then enter the IP Address, Subnet Mask, and Default
Gateway. Contact your system administrator if necessary.
• If DHCP mode is selected, then the IP address, subnet mask, and default gateway
will be specied by the DHCP server.
18. Click the Apply button to save the changes. This operation will require a reboot.
19. Click the Reboot button near the bottom of the page.
20. Repeat these steps for each Sender and Receiver to be congured.
21. After the desired IP settings have been applied, set the video channel for each
Sender unit. See “Setting the Video Channel” on page 23 for more information.
Important: The use of a managed Gigabit switch with “Jumbo Frame” and “IGMP
Snooping” capability is required when connecting the 4K Ultra HD HDMI &
USB-C KVM over IP to a network. The switch should be set to greater than 8K
and IGMP Snooping must be enabled.
Installation & Conguration
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
