Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 10 van 134
10
ID Name Description
5 IR Out Connect an IR Emitter cable (Gefen part no. EXT-IREMIT) from this
port to the 4K UHD source to control the source from the viewing
location.
6 Service Press this button to reset the unit to factory default settings.
7-8 CH +/- These buttons serve two purposes. 1) Press the +/- buttons to
increment/decrement, respectively, the current channel number.
See “Setting the Video Channel” on page 23 for more information.
2) Press and hold the + (“USB”) button to switch between USB
modes. See “USB Control” on page 42 for more information.
9 IP Toggle this button to view RX Channel ID or IP Address.
10 CH ID Displays RX Channel ID or IP Address.
11 12 13 14 15 16 17 18 19
ID Name Description
11 Power This LED glows solid blue when the unit is Powered ON via AC
outlet or PoE. See “LED Status” on page 22 for more information.
12 LAN 1 (PoE) Connects the Sender unit to a PoE-capable switch (or directly to the
Receiver unit) using shielded CAT-5e (or better) cable.
13 LAN 2 This port is used as an Ethernet Hub or for daisy chaining units.
14 Opt In Connect an optical audio cable from a 4K UHD Display to this
TOSLINK port. (For Audio Return Path)
15 RS-232 Connect an RS-232 cable from this port to an RS-232 controller.
See “Using RS-232” on page 39 for more information.
16 Prog. Switch For factory use only. This switch must stay in the Off position.
17-18 USB Connect up to two USB devices to these USB 2.0 Ports.
19 HDMI Out Connect an HDMI cable from this connector to a 4K UHD Display.
Physical Features
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
