Garrett Paragon handleiding
Handleiding
Je bekijkt pagina 27 van 44
1557900 REV B1 Paragon User Manual 27
3. When the prompts, REPEAT CODE, re-enter
the new ve-digit code. e message, CODE
ENTERED OK, should appear. (If the message,
INVALID ENTRY, appears, repeat steps 2 and
3.)
Note: See Section 5.8 for resetting access code.
• RX Balance
RX BAL refers to the balance level of the receiv-
ing antennas and is a “view only” item. Any number
less than 50 is acceptable. A number greater than 50
will elicit the message, RX BAL #, and the pinpoint
lights within the problem zone will illuminate. Should
this occur, ensure that there is no large metal object
adjacent to Paragon. en, ensure that the balance
number has fallen below 50 and the corre-
sponding pinpoint lights are o. (Refer to section
9.2 for more help in resolving this issue if necessary.)
• Sequence
SEQUENCE indicates the number of times the system
has been accessed via password. is is a “view only”
menu item.
• Operating Hours
OP HOURS indicates the number of hours the unit
has been in operation (i.e. switched on). is is a “View
Only” menu item.
• NFC
Control NFC accessibility with four settings.
• NFC Remove Card
To remove an NFC Card from the walkthrough memo-
ry, press + and hold the card up to the NFC icon on the
left side of the detection head.
• NFC List Cards
Press + to view and cycle through the NFC cards that
have been added to the walkthrough.
• NFC Update Cards
To update an NFC Card that has been added to the
walkthrough, press + and hold the card up to the NFC
icon on the left side of the detection head. en, follow
the menu prompts on the display to update the settings
available on your card.
• NFC View Cards
To view the settings of an NFC Card, press + and hold
the card up to the NFC icon on the left side of the de-
tection head.
• Relay:
To determine whether an attached Relay Module con-
trols the walkthrough switches or whether the walk-
through does, press + or -.
• Beacon Light:
To turn the beacon light on or o, press + or – to alter-
nate between entry status (On) and O.
Bekijk gratis de handleiding van Garrett Paragon, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Garrett |
| Model | Paragon |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6746 MB |