Furuno SC-33 handleiding
Handleiding
Je bekijkt pagina 20 van 52
2. WIRING
12
2.2.2 How to connect the Cable Replacement Kit (OP20-50)
Use a waterproof relay box (JPBS06) to relay connection when connecting to the SC-33 with the
MJ-A10SPF0015-150C/300C cable used in SC-30.
1) Unfasten four washer head screws on the top of the waterproof relay box to remove the cover.
2) Fabricate the MJ-A10SPF0015-150C/300C as follows.
1) Cut the MJ-10 connector part. Expose inner vinyl sheath by approx. 40 mm. Be careful not
to damage inner shield and cores.
2) Cut unused wires (green, yellow and purple) to approx. 10 mm, then isolate them with vinyl
tape. Wrap the drain wire with a vinyl tube.
Note: Make sure the rubber bush and ring are oriented correctly (as shown in the figure
above).
40 mm
40 mm
40 mm
Rubber Bush (Large)
䚷
+ Ring
Rubber Bush (Large)
䚷
+ Ring
10 mm
10 mm10 mm
Wrap the drain wires with the vinyl tube.
Wrap the drain wires with the vinyl tube.
Vinyl tape
Vinyl tape
Cap
Cap
Bekijk gratis de handleiding van Furuno SC-33, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | SC-33 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9007 MB |
