Furuno NX-900 handleiding
Handleiding
Je bekijkt pagina 26 van 111
2. OPERATION
2-4
2.4 How to Adjust the Display Brilliance/Panel
Dimmer
2.4.1 How to adjust display brilliance/panel dimmer
The display brilliance/panel dimmer can be adjusted by short pressing the /BRILL
key. The display shown below appears. Use to adjust the display brilliance and
to adjust the panel dimmer values (default: 17), then press the ENT/ACK key.
Press the MSG/FILTER key to change between the [Day] or [Night] modes (default:
[Day]).
Note: If the setting value for display/panel is less than 7, the value automatically rises
to 7 when the power is applied, an alert occurs, or when a key is operated. If none of
the above mentioned events occur, the display brilliance can be adjusted from 0 to 6
and the panel dimmer from 1 to 6.
2.4.2 Display/panel dimmer preset
You can set the brightness of the display and panel when the [Day] or [Night] mode is
selected.
1. Press the MENU/ESC key to open the main menu.
2. Select [Display] and press the ENT/ACK key.
3. Select [Dimmer Preset] and press the ENT/ACK key to show the following display.
4. Use or to select [Day] or [Night] mode for [Display] dimmer, then press the
ENT/ACK key. The setting range is 0 (dark) to 19 (bright).
5. Set the value and press the ENT/ACK key.
• : Raises the dimmer.
• : Decreases the dimmer.
6. Repeat steps 4 and 5 for [Panel] dimmer. The setting range is 1 (dim) to 19
(bright).
7. Press the MENU/ESC key to close the menu.
Bekijk gratis de handleiding van Furuno NX-900, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | NX-900 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12678 MB |
