Furuno AR-100M handleiding
Handleiding
Je bekijkt pagina 51 van 122
2. INSTALLATION AND INITIAL SETTINGS
2-7
*: The USB keyboard is used only for adjusting the initial settings menu. To prevent
unintended operation, do not connect the USB keyboard during normal use of the
system.
Note: An ENC dongle is necessary to share the ENC charts from the ECDIS. Keep
the ENC dongle connected to one of the USB ports on the main PC while using the
AR navigation system.
Hiding the LED indicators
If the LED indicators on the main PC and the ENC dongle are too bright at night, cover
them with vinyl tape. The location of the LED indicator is shown in the following figure.
Remote PWR switch
Connect a remote switch (supplied locally) to the Remote PWR switch port, to turn the
system on/off from a remote switch.
12 LAN2 Port Connect the IP camera through the PoE adapter.
13 LAN1 Port Connect the HUB-3000 to communicate with the
bridge navigational equipment.
No. Name Description
Front
Rear
ENC dongle
1
2
Status
Short 1 and 2.
Open
Description
Turn the system on/off.
-
Bekijk gratis de handleiding van Furuno AR-100M, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Furuno |
| Model | AR-100M |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28951 MB |
