Full Boar FBAHR-032 handleiding
Handleiding
Je bekijkt pagina 9 van 17
9
AIR HYDRAULIC RIVETER SAFETY WARNINGS
• Check prior to each operation that the safety and triggering mechanism is
functioning properly and that all nuts and bolts are tight.
• Do not carry out any alterations to the air tool.
• Avoid weakening or damaging the tool, for example by:
– punching or engraving;
– modification not authorized by the manufacturer;
– guiding against templates made of hard material such as steel;
– dropping or pushing across the floor;
– using the tool as a hammer;
– applying excessive force of any kind..
• Do not connect tool to pressure that potentially exceeds 101.5 psi (7 bar).
• Only use clean, dry and regulated compressed air at 5 - 7 bar (72.5 - 101.5
psi)
• Only technically skilled operators should use the air tool.
• Do not overreach. Only use in a safe working place. Keep proper footing and
balance at all times.
• Keep bystanders away (when working in an area where there is a likelihood of
through traffic of people). Clearly mark off your operating area.
• Only wear gloves that provide adequate feel and safe control of triggers and
any adjusting devices.
• The tool must be disconnected from the air supply and rested on a flat
surface when not in use.
• Always wear impact-resistant eye protection with side shields during
operation of the tool.
• Appropriate hearing protection shall be worn.
• The risks to others shall be assessed by the operator.
• Ensure tool is always safely engaged on the work piece and cannot slip.
• Ensure the tool is correctly lubricated during use. Only use the correct
lubricant as specified in this manual.
• Slips, trips and falls are major causes of workplace injury. Be aware of slippery
surfaces caused by use of the tool and also of trip hazards caused by the
airline hose.
• Proceed with additional care in unfamiliar surroundings. Hidden hazards may
exist, such as electricity or other utility lines.
• This tool is not intended for use in potentially explosive atmospheres and is
not insulated from coming into contact with electric power.
• Never use oxygen or combustible gases for operating pneumatic tools as this
could create a fire and explosion hazard.
• Do not discard the manual and safety instructions.
Bekijk gratis de handleiding van Full Boar FBAHR-032, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAHR-032 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2308 MB |
