Full Boar FBAHR-032 handleiding
Handleiding
Je bekijkt pagina 8 van 17
8
AIR HYDRAULIC RIVETER SAFETY WARNINGS
• Read and understand instruction manual before using.
• Always wear impact-resistant eye protection during the operation of the
air tool.
• Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and
completely assembled could result in serious personal injury.
• Do not actuate the tool unless the tool is placed firmly against the
workpiece.
• Disconnect the tool from the air supply if the tool jams. While removing a
jammed rivet, the tool may be accidentally activated if it is connected to the
air supply.
• Do not carry tool with finger on the trigger.
• Keep the tool pointed in a safe direction at all times.
• Never attempt to fire a rivet into material that is too hard, or at a too
steep of angle, or near the edge of the workpiece.
• Disconnect the tool from the air supply before performing maintance,
leaving work area, moving tool to another location, making any adjustments,
during non-operation or handing tool to another person. Failure to do so
could result in serious personal injury.
• Clean and inspect the tool daily. Carefully check for proper operation of
trigger and safety mechanism.
• DO NOT use the tool unless the trigger is functional, or if the tool is
leaking air or needs any other repair.
• Be aware that the failure of the work piece, or accessories, or even of the
fastener driving tool itself, can generate high-velocity projectiles.
• Air under pressure can cause severe injury.
• Whipping hoses can cause severe injury. Always check for damaged or
loose hoses and fittings.
• DO NOT exceed the maximum pressure stated on the tool.
• Never carry an air tool by the hose.
• Quick connector couplings shall be used for connection to the compressed air
system and non-sealable air inlet connector must be fitted at the tool in such
a way that no compressed air remains in the tool after disconnection.
• Air tools shall only be connected to an air supply where the maximum
allowable pressure of the tool cannot be exceeded by more than 10%; in
the case of higher pressure ,a pressure reducing valve which includes a
downstream safety valve shall be built into the compressed air supply.
WARNING! Disconnect the tool from the air supply before inspecting the
air tool. Failure to do so could result in serious personal injury.
Bekijk gratis de handleiding van Full Boar FBAHR-032, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAHR-032 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2308 MB |
